LumaPro 72W UV LED Nail Dryer, LCD Timer With Infrared Auto-Sensor
LumaPro 72W UV LED Nail Dryer, LCD Timer With Infrared Auto-Sensor
Details
Set your hand or foot inside and this lamp takes it from there — an infrared sensor picks up the motion and starts the cure automatically, no button-pressing required. The 72W output pushes most gels through a full cure in 10 to 30 seconds, and a large LCD panel keeps the countdown easy to read from across the table. It's sized for a home vanity or a salon station alike, at 296 x 210 x 105 mm and just 720 g.
Features
- 72W output for fast curing — Most gels cure in 10 to 30 seconds under the standard timer modes.
- Broad gel compatibility — Cures UV gel, LED gel, builder gel, and hard gels without switching lamps.
- Hands-free infrared sensing — The lamp activates automatically once your hand or foot is inside, no buttons needed to start a cycle.
A gentler setting when you want it
Alongside the 10s, 30s, and 60s standard cures at full 72W power, a dedicated 99-second low-heat mode drops output to 48W for a noticeably gentler curing experience. Built-in over-temperature protection keeps output in check automatically, so the lamp regulates its own heat through longer sessions.
How to use it
- Connect the AC adapter (rated 100–240V, 50/60Hz, 1A).
- Place your hand or foot inside the lamp — the infrared sensor starts the cure automatically.
- Select a timer: 10s, 30s, 60s, or the 99s low-heat mode.
- When the cycle ends, remove your hand or foot and let any residual warmth fade before the next round.
Specifications
| Power | 72W (10/30/60s modes); 48W in 99s low-heat mode |
| Wavelength | 365 + 405 nm |
| LED beads | 36 |
| Rated lifetime | 50,000 hours |
| Adapter input | AC 100–240V, 50/60Hz, 1A |
| Timer settings | 10s, 30s, 60s, 99s low-heat |
| Sensor | Infrared, hands-free activation |
| Size | 11.7" x 8.3" x 4.1" (296 x 210 x 105 mm) |
| Weight | 1.6 lb (720 g) |
| Use | Hands and feet |
Frequently asked questions
What gels does it cure?
UV gel, LED gel, builder gel, and hard gels are all compatible, so you don't need a separate lamp for each type.
Does it work for toes as well as fingers?
Yes — the lamp's opening fits both hands and feet.
What's the difference between the timer modes?
10s, 30s, and 60s run at the full 72W for fast standard cures; the 99s mode drops to 48W for a gentler, lower-heat session.
Do I need to press a button to start it?
No — the infrared sensor detects your hand or foot and starts the selected timer automatically.
Every order ships free with no minimum, and you have 30 days to return it. Real human support is here at Support@fioriscas.com.