Waterproof Submersible LED Pool Light With Remote Control, RGB

Drop this little disc into the water and your pool turns into a proper evening event — a remote-controlled, fully waterproof LED light built for pools, ponds, and anything else that holds water. It packs ten premium LED beads into a compact 7 x 3 cm (2.8" x 1.2") housing, throwing a 360-degree, 360-lumen glow that's noticeably brighter and more vivid than the eight-LED lights it's usually compared against.

Hosting friends around the pool after dark, adding a glow to a garden pond, or just wanting the tub to feel like an occasion rather than a chore — this light hands you the colour and control to set the mood without wiring anything in. The included remote switches it on and off and cycles through every colour and mode from wherever you're standing, so you're never reaching into the water to change the vibe.

Features

• Bright, colour-rich output — ten premium LED beads deliver a 360-lumen, 360-degree glow at a warm 2900K, noticeably brighter than comparable eight-LED submersible lights.
• Real underwater range — the RF remote reaches 15 m above the surface and 2 m underwater, works without direct aiming, and is built to punch through the signal loss that trips up cheaper remotes in large, deep, or walled-in pools.
• Fully waterproof, IP68-rated — sealed housing with suction cups for mounting, rated for both wet and dry settings, and built to shrug off weather when used outdoors.

Where you can use it

It's just as at home outside the pool: ponds, boats, building foundations, aquariums and fish tanks, vases and flower arrangements, waterfalls, bathtubs, and jacuzzis all work, and it switches easily between decorative lighting and a soft night light indoors or out.

Lighting modes and remote control

The light itself cycles through 12 signature colours, while the included IR remote unlocks 16 static colour options so you can lock in the exact tone you want. Layer on six automatic colour-shifting modes plus manual brightness control, and one remote can run several lights at once — handy if you're lighting more than one corner of the pool.

Usage and care

Before it goes in the water, turn the lid clockwise to make sure it's fully sealed. If the light stays red and stops cycling through colours, the battery is running low — swap it out and normal operation comes straight back. Keep it within the maximum recommended immersion depth of under 2 metres.

The light runs on 3 AA batteries (not included), while the remote takes a small button-cell battery. Pick it up as a single unit or in a 2-pack or 4-pack, and every pack includes 13 lamp suckers, the IR28 button remote, and 2 suction cups for mounting.

Specifications

Frequently asked questions

How many colours does it offer?
The light itself runs 12 signature colours, and the IR remote adds 16 static colour choices, plus six automatic colour-shifting modes.

How deep can I submerge it?
Keep it within the maximum recommended immersion depth of under 2 metres, and always turn the lid clockwise to seal it before it goes in the water.

Do I need to aim the remote directly at the light?
No — the RF remote doesn't need direct line of sight, reaches 15 m above the surface and 2 m underwater, and can control multiple lights from one handset.

Every order ships free with no minimum, and you've got 30 days to send it back if it's not right for you. Real human support is here at Support@fioriscas.com.