Wall-Mount Bike Storage Rack for Small Rooms and Garages

Bikes have a way of taking over a hallway or garage floor — until you get them up off the ground. This wall-mounted rack turns a slim strip of wall into upright bike storage, holding each bike by its pedal at a 25-degree angle so you can stack several side by side on a single stretch of wall, all in sturdy black high-carbon steel built to hold real weight, not just look the part.

Features

• True space saving — hangs each bike horizontally off the pedal, freeing the floor in your living room, bedroom, or garage instead of eating into it.
• Stack multiple bikes — the 25-degree hook angle lets bikes nest close together, so a standard 2.5m (8.2ft) wall can hold up to three.
• Frame-safe design — the hook grips the pedal rather than the frame, so there is no metal-on-paint contact to worry about.
• Built to hold real weight — high-carbon steel construction is rated for up to 220 lbs (100 kg) on a wall that can support it.

What fits

The hook works with most pedal types — road, mountain, or electric bike — as long as the pedal axle is 20mm (0.8in) or under, which covers the vast majority of bikes. Because the bike hangs by the pedal rather than the wheel, it sits close to the wall and stays put once it is on the hook, with no swinging or shifting to worry about.

Installing it

1. Mark where the mounting holes should go on the wall.
2. Drill with an M6 bit to about 32mm (1.3in) deep, then clear out the hole.
3. Insert the expansion screws provided.
4. Tighten each screw and check that it is secure.
5. Repeat the same steps for any additional hooks you are installing.

Specifications

What is in the box

Each rack includes one pedal holder, one full set of expansion screws, and two tire holders, so you have everything you need to mount it straight out of the box.

Frequently asked questions

How many bikes can I hang on one wall?
With hooks fixed at a 25-degree angle, you can stack up to three bikes on a standard 2.5m (8.2ft) wall.

Will it scratch my bike frame?
No — the hook holds the bike by its pedal, not the frame, so there is no direct frame contact.

What tools do I need to install it?
Just a drill with an M6 bit and a screwdriver. The included expansion screws and simple steps make it a straightforward wall mount.

Every order ships free with no minimum, and you have 30 days to return it if it is not the right fit for your space. Real human support is here at Support@fioriscas.com.